ADLINK MXC-2300 - Manual (Page 33)

PRELIMINARY
Introduction 21
MXC-2300
X Up to 1Mbps programmable transfer
X
Support for standard DeviceNet data rates 125, 250 and
500 Kbps
1.6.5 USB 2.0 Ports
The MXC-2300 provides four USB 2.0 ports supporting Type A
USB connection on the front panel. All USB ports are compatible
with high-speed, full-speed and low-speed USB devices. The
MXC-2300 supports multiple boot devices, including USB flash
drive, USB external hard drive, USB floppy, USB CD-ROM and
others. The boot priority and boot device can be configured in
BIOS. Please refer to Section B.8: Security on page 88 for details.
1.6.6 USB 3.0 Ports
The MXC-2300 provides a USB 3.0 port supporting Type A USB
3.0 connection on the front panel, compatible with super-speed,
high-speed, full-speed and low-speed USB devices.
1.6.7 Gigabit Ethernet Ports
The MXC-2300 has two Gigabit Ethernet ports on the front panel,
supporting the Intel WGI210IT GbE controller, which provides:
X
IEEE 802.3az Energy Efficient Ethernet
X
IEEE 1588/802.1AS precision time synchronization
X
IEEE 802.3Qav traffic shaper
X
Interrupt moderation, VLAN support, IP checksum offload
X
PCIe OBFF (Optimized Buffer Flush/Fill) for improved sys-
tem power management
X Four transmit and four receive queues
X RSS and MSI-X to lower CPU utilization in multi-core sys-
tems
X
ECC - error correcting memory in packet buffers
X
Wake-On-LAN
X
NC-SI for increased bandwidth passthrough
X
Preboot eXecution Environment (PXE) flash interface
X
Jumbo frame support