ADLINK MXC-2300 - Manual (Page 35)

PRELIMINARY
Introduction 23
MXC-2300
1.6.9 DVI-I Connector
The MXC-2300 provides one DVI-I connector providing connec-
tion to an external monitor.
Table 1-8: DVI-I Connector Signals
CAUTION:
Since VGA signals are analog based, VGA display quality is
greatly affected by quality and length of cable used. We
strongly recommended VGA cable less than 2 meters in length
with effective shielding, such as UL style 2919 AWM.
Pin Signal Pin Signal Pin Signal Pin Signal
1 DVIdata 2- 9 DVIdata 1- 17 DVIdata 0- C1
Analog
Red
2 DVIdata 2+ 10 DVIdata 1+ 18 DVIdata 0+ C2
Analog
Green
3 GND 11 GND 19 GND C3
Analog
Blue
4 CRT DDC clock 12 N/C 20 N/C C4
Analog
horiz.
sync
5 CRT DDC data 13 N/C 21 N/C C5
Analog
GND
6 DVIDC clock 14 +5V 22 GND
7 DVIDC data 15 GND 23 DVI clock +
8
Analog vert.
sync
16
Hot plug
detect
24 DVI clock -