A.3.10 amt configuration, A.3.10, Amt configuration – ADLINK NuPRO-E42 User Manual
Page 60
Advertising
48
When the temperature in degrees (°C) is higher than the set
value, FAN1 will increase its speed according to the PWM
Slope Setting value.
Fan Start PWM
Sets the PWM value of the fan between Fan Off Temperature
Limit and Fan Start Temperature Limit. Minimum value is 0
and maximum is 127.
PWMSlope Setting
The Slope PWM Value sets the rate of increase the fan speed
when the temperature is above Fan Start Temperature Limit.
System Status
System temperature, CPU temperature and fan speed (FAN1),
system voltages.
A.3.10 AMT Configuration
AMT
This item allows the user to Enable/Disable the Intel AMT func-
tion.
Advertising