ADLINK NuPRO-E42 - Manual (Page 73)

61
NuPRO-E42
cuted, using either or either the Supervisor password or User
password.
The Supervisor and User passwords activate two different lev-
els of password security. If you select password support, you
are prompted for a one to six character password. Type the
password on the keyboard. The password does not appear on
the screen when typed. Make sure you write it down. If you for-
get it, you must drain NVRAM and re-configure.
Remember the Password
Keep a record of the new password when the password is
changed. If you forget the password, you must erase the sys-
tem configuration information in NVRAM.
To access the sub menu for the following items, select the item
and press < Enter >:
X Change Administrator Password
X Change User Password
X Clear User Password
Administrator Password
Indicates whether a Administrator password has been set.
User Password
Indicates whether a user password has been set.
A.7 Exit Menu
Select the Exit tab from the setup screen to enter the Exit BIOS
Setup screen. You can display an Exit BIOS Setup option by high-