ADLINK NuPRO-E320 - Manual (Page 41)

Getting Started 27
NuPRO-E320
3 Getting Started
This chapter provides information on how to install components on
the NuPRO-E320 SHB.
3.1 Installing the CPU
The NuPRO-E320 supports a single Intel® Core™2 Quad/Duo,
Pentium® D, or Celeron® M processor via the surface mount
LGA775 socket (Socket T).
To install the CPU:
1. Press the load lever (A), then disengage it from the
retention tab (B).
WARNING:
Disconnect all power supply to the board
before installing a CPU to prevent damaging
the board and CPU.
Do not touch socket contacts. Damaging the
contacts voids the product warranty. Follow
the installation instructions carefully to avoid
damaging to motherboard components.
A
B