ADLINK NuPRO-E320 - Manual (Page 51)

Driver Installation 37
NuPRO-E320
4.5 Audio Driver
Follow these instructions to install the audio driver for the optional
DB-Audio2 daughter board.
1. Place the ADLINK All-in-One DVD to the optical drive.
2. Locate the audio driver from the directory
X:\Audio Daughter Board\DB-Audio2\, then dou-
ble-click on the setup.exe file to start installation.
3. Follow the screen instructions to complete installation,
then restart the system if prompted.
NOTE: NOTE:
Before installing the audio driver, check the BIOS settings to
make sure that audio is enabled: Chipset > South Bridge
Configurations > HDA Controller (see “South Bridge Con-
figuration” on page 67).