2 south bridge configuration – ADLINK NuPRO-E320 User Manual
Page 81
BIOS Setup
67
NuPRO-E320
5.7.2
South Bridge Configuration
You can use this screen to select options for the South Bridge
Configuration. Use the up and down <Arrow> keys to select an
item. Use the <Plus> and <Minus> keys to change the value of the
selected option.
HDA Controller
Set this value to Enable/Disable the HDA Controller.
Restore on AC Power Loss
Determines which state the computer enters when AC power is
restored after a power loss. The options for this value are Last
State, Power On and Power Off.
X
Power Off: Set this value to always power off the system
while AC power is restored.
X
Power On: Set this value to always power on the system
while AC power is restored.
X
Last State: Set this value to power off/on the system
depending on the last system power state while AC power
is restored.