ADLINK NuPRO-A331 - Manual (Page 84)

70 BIOS Setup
5.7.2 PCH Configuration
HDA Controller
Set this value to Enable/Disable the HD Audio Controller.
82574L LAN Boot
Set this value to enable/disable the LAN controller.
Restore on AC Power Loss
Determines which state the computer enters when AC power is
restored after a power loss. The options for this value are Last
State, Power On and Power Off.
X Power Off: Set this value to always power off the system
while AC power is restored.
X Power On: Set this value to always power on the system
while AC power is restored.
X Last State: Set this value to power off/on the system depend-
ing on the last system power state while AC power is restored.
LAN PXE ROM Init
Invokes the onboard LAN’s PXE ROM to enable boot from LAN.