ADLINK AmITX-BT-I User Manual
Amitx-bt-i, User’s manual
Advertising
Table of contents
Document Outline
- AmITX-BT-I
- Revision History
- Preface
- Table of Contents
- 1. Introduction
- 2. Specifications
- 2.1. Core System
- 2.2. Rear I/O Connectors
- 2.3. Internal Headers and Connectors
- 2.4. Form Factor
- 2.5. SEMA Board Controller
- 2.6. Debug Header
- 2.7. Video
- 2.8. Audio
- 2.9. LAN
- 2.10. Power Specificatio
- 2.11. Operating Temperatures
- 2.12. Environmental
- 2.13. Operating Systems
- 2.14. Power Consumption
- 2.15. Functional Diagram
- 3. Mechanical Layout
- 4. Connectors and Jumpers
- 4.1. Rear IO Connectors
- 4.2. Internal Connectors
- 4.2.1. ATX Power Connector (ATX_PWR, proprietary)
- 4.2.2. SATA Connectors (SATA1, SATA2)
- 4.2.3. SATA Power Connector (ST_PWR)
- 4.2.4. USB Header
- 4.2.5. PS/2 Keyboard and Mouse Connector
- 4.2.6. Internal Audio Connector
- 4.2.7. CPU Fan and System Fan Connectors
- 4.2.8. Serial COM Port Connectors
- 4.2.9. LVDS Connector
- 4.2.10. LVDS Auxiliary Connector
- 4.2.11. Front Panel Connector
- 4.2.12. Feature Connector
- 4.2.13. SPI Header
- 4.2.14. DB40 Debug Board Connector
- 4.3. Jumper and Switch Settings
- 4.3.1 ATX/AT Mode Jumper Selection (JPY1)
- 4.3.2 Clear CMOS and BIOS Default (JP5)
- 4.3.3. Reset BIOS Defaults (JP6)
- 4.3.4. SATA2/mSATA Select (JP1)
- 4.3.5. LVDS Backlight Power Jumper Selection (JP2)
- 4.3.6 LVDS Panel Power Jumper Selection (JP3)
- 4.3.7 LVDS Backlight Enable Jumper Selection (JP4)
- 4.3.8. Serial Port Mode Switch Setting (SW14, SW10, SW11)
- 4.3.9. BIOS Switch Setting (SW1)
- 4.4. Onboard Connector Information
- 5. Driver Installation
- 6. Smart Embedded Management Agent (SEMA)
- 7. System Resources
- Safety Instructions
- Getting Service