ADLINK AmITX-IB-I - Manual (Page 31)

Getting Started 19
AD-mITX-T40H
3 Getting Started
This chapter provides information on how to install components on
the AD-mITX-T40H motherboard.
3.1 Installing the CPU
The AD-mITX-T40H supports a 22/32nm Intel® Xeon®
E3-1275/1225, Core™ i7/i5/ i3, Pentium/Celeron® processor in an
LGA1155 socket.
To install the CPU:
1. Press down on the locking arm (A), then push it away from
the socket to disengage it from the retention tab (B).
WARNING:
Disconnect all power to the board before installing a CPU to
prevent damaging the board and CPU.
Do not touch socket contacts. Damaging the contacts voids the
product warranty. Follow the installation instructions carefully to
avoid damaging the board components.
A
B