ADLINK MI-220 - Manual (Page 73)

BIOS Setup 61
MI-220
4.5 Boot Configuration
Select the Boot tab from the setup screen to enter the Boot BIOS
Setup screen. You can select any of the items in the left frame of
the screen, such as Boot Device Priority, to go to the sub menu for
that item. You can display a Boot BIOS setup option by highlight-
ing it using the < Arrow > keys. The Boot Configuration screen is
shown below:
Bootup NumLock State
This setting determines the state of the NumLock function on
bootup. Options: On, Off.
Quiet Boot
When this feature is enabled, the BIOS will display the full-
screen logo during the boot-up sequence, hiding normal POST
messages.
When it is disabled, the BIOS will display the normal POST
messages, instead of the full-screen logo.