Alwarerc Senrigan GP-25 Lite Brushless Gimbal - Manual (Page 10)

Step 5.
Side view. Step 6.
Make sure the Top Plate are secured in the right and
flat position.
Step 7.
Connect Tilt Roll Control Cable into the RC IN port
,and the Power Cable into DC IN port. Step 8.
Soldering the Power Cable of GP-25 with any
soldering point on the F550.
(Important: Red =
Positive, Black = Negative, make sure you are using
3S lipo 11.1V for F550 as well.)
Page 10 of 19