Alwarerc Senrigan GP-25 Lite Brushless Gimbal - Manual (Page 3)

1. Introduction
Features:
-Direct drive of Brushless Motors for both Roll and Tilt axis.
-Full fit to Phantom Quadcopter without any modification.
-Full fit to DJI F450/ 550 Multicopter with “DJI F450 F550 Landing Gear Upgrade Set” (not included).
-Simple and strong Mechanism Design.
-Made of CNC Metal Parts and 3K Carbon Frames which is super light and strong.
-With clean wiring structure design, which provides a 360° mechanic continuous rotation in the Tilt axis and
smoothest movement in both two axises!
-Comes with qualified new Simple Brushless Gimbal Controller (Pre-programmed) and 3-Axis IMU Sensor.
-Workable with Alexmos GUI which is the more user friendly interface for tuning and setting if necessary.
-Well tested and PID parameter tuned by the factory for GoPro 1/2/3 cameras.
-Very easy to install and use.
-Compact, light and valuable.
Specification:
-Movement: 2-axis, Roll and Tilt
-Roll control: ±40°
-Tilt control: ±90° (360° mechanic continuous rotation)
-Working Voltage: 3S 11.1V Lipo (default)
-Brushless Gimbal Controller Weight: 13.4g
-IMU Weight: 2.6g
-Brushless Gimbal Motor Weight: 48g /Pcs
-Gimbal Weight (without Gopro): 203g
Included:
1x Senrigan GP-25 Lite Brushless Gimbal (Preassembled)
1x New Simple Brushless Gimbal Controller(Pre-programmed) with 90 Degree Tilting Setting
1x 3-Axis IMU Unit
6x Rubber Tension Damper Balls 200G
1x Tilt and Roll Controlling Connector
1x Power Cable
1x Mount screw pack
(Please be noted that Gopro, Phantom/ F450/ F550 and Battery are not included.)
Page 3 of 19