Alwarerc Senrigan GP-25 Lite Brushless Gimbal - Manual (Page 7)

Step 5.
Install 6pcs Rubber Tension Damper Balls on the Top Plate. Step 6.
Mount the Top Plate onto the F450.
Step 7.
Use 3pcs carbon washers, 2pcs 6mm Nylon Rods,
3pcs M3*14mm Hex Cap Screws and M3 Self-lock
Nuts. Step 8.
Insert 2pcs 6mm Nylon Rods on the front position and
secure with M3 Self-lock Nuts.
Step 9.
Connect Tilt Roll Control Cable into the RC IN port
,and the Power Cable into DC IN port. Step 10.
Install the GP-25 to the 6pcs Dampers on the Top
Plate which has been installed on F450 frame.
Page 7 of 19