American Sanders 3DS Orbital Sander - Manual (Page 5)

EN ENGLISH
Clarke ® American Sanders Operator’s Manual (EN) - 3DS - 5 -
Introduction & Machine Specifications
The 3DS is a machine designed primarily for fine finish sanding of hardwood floors. The finish sanding process
results in a smoother and flatter floor and assists in removing imperfections created during the drum or belt sanding
process. This machine can not be used on wet surfaces.
PRODUCT SPECIFICATIONS
Vacuum Equipped w/vacuum
Weight 163 lbs. (74 kg)
Shipping Weight 234 lbs. (106 kg)
Machine Type 3 Disc Dry Sanding
Motor 3 Hp Single Phase 2.2kW Single Phase
Voltage 230v
Frequency 60 Hz 50 Hz
Supply Cable 40’ 12-3 SJO 15m HO7RN-F3G1.50
Amperage 11.5 A
Overload Protection 15 A Circuit Breaker
Motor Insulation Class F
Working Diameter 18.75” (48 cm)
Sanding Pad Diameter 8” (203 mm)
Sanding Pad Speed (Loaded) 717 rpm
Disc Housing Speed (Loaded) 170 rpm
Noise Emission 76 dBA
Sanding Unit Weight 109 lbs (49 kg)
Chassis Weight 37 lbs (17 kg)
Dimension LxWxH 35” x 20” x 39.5” (88 x 51 x 100 cm)
Machine Code 07082C 07085C (EU) 07112A (UK)