AMT Datasouth Accel 7450 - Manual (Page 21)

ACCEL-7450
- 21 -
5. HIGH IMPACT
Press the key to temporarily change the print impact for
multipart forms from NORMAL to DARK print mode. The
HIGH IMPACT light is ON when DARK print mode is selected.
HIGH IMPACT reverts to the current value selected in the
printer’s control panel menu settings.
The factory default value is NORMAL
6. LF
Press the LF key to feed the line in the forward direction at a
pitch of 1/6 inch regardless of the LF PITCH setting in the
printer’s control panel menu. Holding this key down produces
continuous line feeding.
7. ENTER Pressing the ENTER key selects the setting displayed on the
LCD.
8. RLF Pressing the RLF key feeds paper the reverse direction at a
pitch of 1/6 inch regardless of the LF PITCH setting in the
printer’s control panel menu. Holding this the key depressed
produces continuous reverse line feeding.
9. RESET (ALT + SPEED/RESET keys)
Pressing the SPEED key while holding the ALT key
evokes a power on reset. The LCD displays
“INITIALIZING” for a few seconds then returns to ready
mode.
LF
MICRO LF
ENTER
ALT
RLF
MICRO RLF
ENTER SPEED
ALT
+
RESET