AMT Datasouth Accel 7450 - Manual (Page 22)

ACCEL-7450
- 22 -
10. FORMFEED ( ALT + TEAR OFF/FF keys)
Pressing this key combination causes pin feed paper to
advance one (1) page length as determined by the
PAGE LGTH setting in the printer’s control panel menu.
If cut sheet paper is loaded, pressing this key
combination causes the paper to be ejected.
11.MENU ( ALT + HIGH IMPACT/MENU keys)
Pressing this key combination opens the printer’s control
panel menu system.
Once the printer’s menu system is open, menu items
may be scrolled with the up and down arrow keys.
The right arrow key opens the displayed menu item.
Once opened, the up and down arrow keys scroll through
all available choices.
Pressing the ENTER key selects the displayed choice.
Pressing the left arrow key exits to the top level menu
items.
Once at the top level menu, pressing the HIGH IMPACT
MENU key exits the menu system and evokes a power
on reset.
Note: Current values are marked with a * in the menu
system.
12. MICRO LF (ALT + LF/MICRO LF keys)
Pressing this key combination causes paper to feed
1/360 inch forward. Use this key to adjust the paper
position.
Holding down these keys produces continuous micro
line feeding.
TEAR OFF ENTER
+
ALT FF
HIGH IMPACT ENTER
+
ALT MENU
LF
MICRO LF
RLF
MICRO RLF
TEAR OFF
FF
HIGH IMPACT
MENU
ENTER LF
ALT
+
MICRO LF