Angelcare AC401 Deluxe - Manual (Page 11)

5.7 - ALARM SETTINGS
Allows you to select your preferred alarm mode.
IMPORTANT
When in MENU or SUB-MENU mode NO
sound, alarm or vibration will be emitted
from either the parent Unit or the Nursery
Unit even if they were activated before
pressing the MENU or SUB-MENU mode.
IMPORTANT
Vibration option will work when the
following alarm functions are activated:
• Out-of-range
• Temperature alert
• No movement detection
for 20 seconds.
Sound alarm will replace vibration
mode when the parent Unit is
in its charging cradle.
Sound alarm
Sound alarm
and vibration
Vibration only (the alarm will
not sound on parent Unit but
it will on Nursery Unit).
5.8 - HOLD
Allows you to put your Angelcare monitor on HOLD.
1) press and hold the Down Volume
arrow for 2 seconds.
The Hold Icon will appear on the
screen. The parent Unit will emit a
double beep every minute to remind
you that your monitor is on HOLD.
2) To deactivate this function, press
and hold the Down Volume
arrow for 2 seconds.
1
2
1) press MENU button 4 times.
The Nursery Unit Indicator
will blinks.
2) Using the arrows, select
the desire notification option.
NOTE:
Vibration mode not available in some countries.
1
2
IMPORTANT
When your monitor is in
HOLD mode, the movement alarm will not go off and the sound
will not be transmitted. When your monitor is in Sound only mode, the HOLD function
cannot be activated.
IMPORTANT
When your monitor is on
HOLD, the movement-detection feature and movement alarm
are disabled.
ADJUST SOUND LEVEL PUT IN TEMPORARY MUTE MODE
Raise volume
Lower volume
press once the
Sound/Off button
to mute sound
(see section 5.6).
1) press MENU button 3 times.
Sensitivity Level icon will appear.
2) With the arrow keys select desired
microphone sensitivity level.
3) press SELECT button to confirm
your choice.
1
2
TO ADJUST SOUND SENSITIVITY (VOX):
The sensitivity of the microphone is adjustable and has 4 levels (the most sensitive is
level 4). This means that sound will only transmit based on the level that you set.
VOX
Sensitivity
Level
(4 levels)
5.6 - TEMPORARY MUTE
Allows you to put your monitor
in temporary
Mute mode.
TO ACTIVATE MUTE:
press the SOUND/OFF button.
TO UNMUTE:
press the SOUND/OFF button again
to unmute sound.
NOTE:
On the parent Unit,
the Mute IcON will blink
.
After 2 minutes the sound function
will be automatically reactivated.
If you press too long on the
SOUND/Off button it will shut
down the parent Unit.
21 20