Angelcare AC401 Deluxe - Manual (Page 12)

Detection Mode:
Sound & Movement are ON
Tic is Off
Temperature Unit:
celcius
Temperature Alarm: Off
Temperature Alarm Setting:
High 30
o c
Low: 19 o c
Sound transmission (VOX): ON
VOX Sensitivity: LEVEL 4
Alarm Mode: Sound Only
Out-of-Range alarm: Off
DEFAULT SETTINGS
YOU ARE NOW READY
TO USE YOUR MONITOR
The Angelcare ® monitor can be used with the pre-program factory settings
or you can also customise your settings to your preference.
IMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
• Test your monitor every time you move the Sensor pad to a different place.
5.9 - TEMPERATURE
TO ACTIVATE TEMPERATURE ALARM:
TO SET TEMPERATURE RANGE:
TEMPERATURE ALARM
• Alarm activates when temperature reaches maximum or minimum set temperature.
• parent Unit will emit 3 consecutive beeps, every few seconds if the temperature
reaches levels out of your chosen range. The relevant icon will flash on the parent
Unit screen to alert you.
The range between the minimum and maximum
temperature must be at least 4
° c. An error tone
will be heard if you try to set it up below
this minimum level.
1) press MENU button 5 times.
The Temperature Indicator
(Low and High) will appear.
2) Using the arrows, to turn the function
ON or Off.
3) press SELECT button to confirm
your choice.
1
2
1
3
6 9
4 7
2
5 8
1) press the MENU button 6 times.
The Temperature Indicator
(Low and High) will appear.
2) Using the arrows, turn the function ON.
3) press the SELECT button to confirm
your choice.
4) press the MENU button and the
Snow flake (Low Temperature icon)
will appear.
5) press the arrows to set the LOW
temperature alarm
6) press the SELECT button to confirm
your choice.
7) press the MENU button and
the Sun icon will appear.
8) Use the arrows to set the HIGH
temperature alarm.
9) press the SELECT button and then
the EXIT button to confirm your choice.
23 22