Denon AVR-3808 - Manual (Page 18)

- 18 -
Z2 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section)
Except Japan model.
COMMAND PARAMETER function example
Z2PS BAS UP ZONE2 BASS UP/DOWN , direct change to **dB Z2PSBAS UP<CR>
BAS DOWN **:00 to 99 by ASCII , 00=0dB Z2PSBAS DOWN<CR>
BAS ** ---AVR-3808 can be operated from -10 to +10(40 to 60) Z2PSBAS 00<CR>
BAS ? Return Z2PSBAS Status Z2PSBAS ?<CR>
TRE UP ZONE2 TREBLE UP/DOWN , direct change to **dB Z2PSTRE UP<CR>
TRE DOWN **:00 to 99 by ASCII , 00=0dB Z2PSTRE DOWN<CR>
TRE ** ---AVR-3808 can be operated from -10 to +10(40 to 60) Z2PSTRE 00<CR>
TRE ? Return Z2PSTRE Status Z2PSTRE ?<CR>