Denon AVR-3808 - Manual (Page 20)

- 20 -
Z3 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section)
Except Japan model
COMMAND PARAMETER function example
Z3PS BAS UP ZONE3 BASS UP/DOWN , direct change to **dB Z3PSBAS UP<CR>
BAS DOWN **:00 to 99 by ASCII , 00=0dB Z3PSBAS DOWN<CR>
BAS ** ---AVR-3808 can be operated from -10 to +10(40 to 60) Z3PSBAS 00<CR>
BAS ? Return Z3PSBAS Status Z3PSBAS ?<CR>
TRE UP ZONE3 TREBLE UP/DOWN , direct change to **dB Z3PSTRE UP<CR>
TRE DOWN **:00 to 99 by ASCII , 00=0dB Z3PSTRE DOWN<CR>
TRE ** ---AVR-3808 can be operated from -10 to +10(40 to 60) Z3PSTRE 00<CR>
TRE ? Return Z3PSTRE Status Z3PSTRE ?<CR>