Bonaire Slimline Digital controller - Manual (Page 18)

Multi-Appliance Slimline Control
Bonaire Control Systems
Page 18
Ducted Evaporative Air Conditioning
OPERATING THE SLIMLINE CONTROLLER
To operate your Slimline Controller, simply press the ON/OFF button. The unit will then display the default
or last used settings and will be ready to operate. Any changes made to the Slimline Controller settings will
have a 3 second delay before the unit responds.
If the Evaporative cooler is connected in conjunction with a central heater you may have to toggle through
the modes to select the Evaporative cooling functions.
A UTO C OOL M ODE
To operate Auto Cool Mode,
STEP 1 Turn the Slimline Controller ON by pressing the ON /
OFF button.
STEP 2 Press the MODE button until the ‘AUTO’ icon
appears on the display and the Cool LED turns on.
STEP 3 Press the Up/Down button to increase or decrease
the comfort level 1 (Cooler) to 12 (Warmer).
M ANUAL C OOL M ODE
To operate Manual Cool Mode,
STEP 1 Turn the Slimline Controller ON by pressing the ON /
OFF button.
STEP 2 Press the MODE button until the ‘MAN’’ icon
appears on the display and the Cool LED turns on.
STEP 3 Press the Up/Down button to increase or decrease
the fan speed 1 (low) to 12 (high).
F AN M ODE
Fan Mode only delivers fresh air (with the pump not operating). To
operate Fan Mode,
STEP 1 Turn the Slimline Controller ON by pressing the ON /
OFF button.
STEP 2 Press the MODE button until the ‘FAN’’ icon appears
on the display and the Fan LED turns ON.
STEP 3 Press the UP/DOWN button to increase or decrease
the fan speed.