Bonaire Slimline Digital controller - Manual (Page 8)

Multi-Appliance Slimline Control
Bonaire Control Systems Page 8
Navigating the Controls
TIMER SETUP
If the Slimline Controller is in the OFF state, the delay time displayed
will represent the turn ON time. The LED of last Mode selected in the
previous ‘ON’ state and ON/OFF LED will flash.
If the Slimline Controller is in the ON state, the delay time displayed
will represent the turn OFF time.
To setup Timer,
1. Press the TIMER button. The Timer LED will come on and the
display will show “4H” which indicates a delay time of 4 hours.
2. Press the UP/DOWN button to change the timer time
between 1 and 24 hours. The timer function will start after five
seconds. Now the unit will turn ON/OFF according to the
hours you have entered.
MODE CONTROL
•
Heat Mode: In Heat Mode the Heat LED will come on and the
display shows the set temperature (but reverts to room
temperature after a few seconds).
Pressing the Up/down buttons will adjust the set temperature.
Pressing and holding the Up/Down button for 2 seconds will
result in the set temperature changing rapidly.
You can set the temperature between 10 and 35° C.
NOTE: Your heating appliance is designed to operate to 20 or
21° C. Each degree above this set level will result in a
significant increase in energy consumption and running costs.
•
Auto Cool Mode: Auto Cool Mode can be operated if an
Evaporative Cooler is connected in conjunction with a central
heater or an Evaporative Cooler is installed by itself. In Auto
Cool Mode the Cool LED will come on and ‘AUTO’ will appear
on the display.
In Auto Cool Mode, the display shows the comfort level and
this level remains visible as long as the Slimline Controller is
in Auto Cool Mode.
Press the Up/Down button to adjust the comfort level. The
user can adjust the set level between 1 (cooler) and 12
(warmer).
•
Manual Cool Mode: Manual Cool Mode can be operated if
an Evaporative Cooler is connected in conjunction with a
central heater or an Evaporative Cooler is installed by itself. In
Manual Cool Mode the Cool LED will come on and ‘MAN’ will
appear on the display.
Press the Up/Down button to adjust the fan speed level. The
user can adjust the fan speed level between 1(Low) and 12
(High).