Bonaire Slimline Digital controller - Manual (Page 6)

Multi-Appliance Slimline Control
Bonaire Control Systems Page 6
Navigating the Controls
Navigating the Controls
SLIMLINE CONTROLLER CONNECTIONS
There are two types of Inputs/Outputs connections on Slimline Controller.
1. Digital Communications
2. R & W Connections
Digital Communications
Digital Communication is connected to the Slimline Controller by a 4 wire cable. The Slimline Controller will
communicate with other Climate Technology products in accordance with the control system specification.
R & W Connection
This connection provides a 2 wire screw terminal for power(R) and the Heat output (W) connection. The
Slimline Controller will obtain power from these connections.
IMPORTANT: These connections are only to be used if connecting to a Heater in two wire mode. This
connection must not be used if the digital communications are connected.
NOTE: If the Slimline Controller is being used to operate both a heater and a cooler, then only digital
communication should be used.
Digital
Communications
R & W
Connections