Chicago Gaming Vacation Pinball - Manual (Page 7)

7
Step 4: Lock backbox
Using scissors or a knife, carefully cut
away or remove all packing material
holding the backbox down.
Slowly and carefully raise the backbox
having your assistants guide the cables
and wires through the “neck” of the game.
Lock the backbox in its upright position by
turning the included Allen wrench ¾ of a
turn clockwise.
Step 5: Remove the Lockdown
Bar:
The lockdown bar is the metal bar that goes
across the front of the game and holds the
playfield glass in place. It’s what you rest
your hands on when playing the game.
Open the front door with the key included in
the game hardware bag. Locate and release
the two latches (inside the front wall to the
left and right of the opening) that hold the
lockdown bar in place. This will release the
playfield glass lockdown bar and allow you to
remove it by lifting it straight up.
Step 6: Install Pinballs:
Locate the three balls packaged with the
game hardware. Pull playfield glass down a
short distance and place the pinballs on the
playfield surface and let them roll down to the
ball trough.
Slide the playfield glass back up and secure
the lockdown bar with the two latches.