Chicago Gaming Putt! Championship - Manual (Page 11)

11
Servicing Floor Lamps
The lamps in the floor are wired in sets of 2. Each set consists of 1 inverter and 2
lamps. There is a single cable that runs from the Monitor Cabinet to each inverter, as
shown below. Each lamp has its own cable, which connects to the other side of the
inverter.
Because both lamps are plugged into the same inverter, you must remove both
blocks in a set when servicing a lamp.
The Floor Lamps are
wired in sets of 2
In a set, one block has an
inverter and the other doesn’t
See the next page for detailed instructions
The Floor Light Cable
connects to each inverter