Chicago Gaming Putt! Championship - Manual (Page 6)

6
4
5
6
7
Place the Handrail in the
mounting holes on the Floor.
Place something (cardboard,
cloth, etc.) on the ground to
protect the artwork. Lift the
Floor up and secure Handrail
from bottom with (4) ¼-20 x 2-
1/4”bolts and ¼” washers.
With the leg levelers on the
Floor in the lowest position,
move the Floor into place.
Connect the 12V DC Lamp
Cable (which extends from the
Floor) to the corresponding
harness, which extends from
the Monitor Cabinet. Make
sure the cable does not get
pinched when pushing the
cabinets together
Using the leg levelers, adjust
the Floor until it is the same
height as the Monitor Cabinet
and Green.