Chicago Gaming Putt! Championship - Manual (Page 7)

7
8
9
10
Once in position, bolt the Floor
to the Monitor Cabinet on
BOTH SIDES below the
speakers from inside the Ball
Mech Cabinet and Coin Door
Cabinet using 2 ¼-20 x 1-1/2”
bolts and ¼” washers.
After everything is assembled
and bolted together, attach the
Ball Chute. Slide one foot of
the Ball Chute under the Ball
Chute Foot below the ball exit.
Make sure the Ball Chute is
aligned with the pilot holes and
secure it with the (2) #8 x ½”
Black Screws.
Lift the carpet on the Green at
the white tabs. Bolt the Green
to the Floor using (4) ¼-20 x
1-1/2” bolts and ¼” washers.
FLOOR AND GREEN ARE STILL ATTACHED AT
THIS STEP
Putting
Floor
Ball Mech
Cabinet