Use fuzzyscan in hid mode – Cino PL680BT HC User Manual

Page 7

Advertising
background image

6

Use FuzzyScan in HID Mode

Power on or wake up the scanner by pressing the Trigger key within
radio coverage if the scanner is power-off or in sleep state, and ensure
the status indicator of scanner blinks red and green alternatively (in
Uninstall” state). If the scanner is not in uninstall state, please scan the
“Uninstall” command first.

Uninstall

If your remote host is equipped with latest Bluetooth drivers, or it’s an iOS
or Android device, you are recommended to use “HID Mode” for quick
paring. If necessary, you may use “HID Mode with Passkey” to establish
a more secure connection. If you frequently experienced the problem in
using HID mode, please try “HID Legacy Mode” instead.

HID

Mode

HID Legacy Mode

HID Mode with Passkey

Once you scan one of above commands, the link indicators of scanner
will blink blue 3 times per 2 seconds during searching process. You
have to execute the Bluetooth Discovery procedure to find available
Bluetooth device, then select “PF(L/A)xxxBT-xxxx”.


If you use “HID Mode”, please go to step 5.


If you use “HID Mode with Passkey”, you will be requested to enter the
Passkey (PIN) on the remote host. Please enter the Passkey (PIN)
accordingly by scanning the “Option Code” (page 13), and then scan the
FIN (Finish)” to end the Passkey entry, then go to step 5.


If you scan “HID Legacy Mode”, the Passkey (PIN) may be requested.
Please enter “00000000” (default setting), you will see “Keyboard on
“PF(L/A)xxxBT-xxxx”. Please double click this HID service to establish the
connection between scanner and remote host device.


The scanner will emit 4 beeps in ascending tone to indicate the
connection is established. At the same time, the link indicators of scanner
will blink blue once per 2.5 seconds to indicate the scanner is in
radio-connected state.


Please note that if the scanner is not connected to the host device within
1 minute after scanning the above command, the scanner will go to sleep
automatically. You can just press the trigger to wake up the scanner to
continue the installation.

The installation procedure may vary depending on different remote
host devices, operating systems and the Bluetooth drivers.

Please

consult your professional IT consultant to obtain necessary support.

Advertising
This manual is related to the following products: