Cino PL680BT HC - Manual (Page 9)

8
Establish SPP Slave Connection
Ensure a virtual COM port is available in your remote host for connecting
the scanner. If not, please go to the folder “Client Applications” located
in Bluetooth Advanced Setting. Click the “Add COM Port” to add one
more Bluetooth COM port.
Power on or wake up the scanner by pressing the Trigger key within
radio coverage if the scanner is power-off or in sleep state, and ensure
the status indicator of scanner blinks red and green alternatively (in
“Uninstall” state). If the scanner is not in uninstall state, please scan the
“Uninstall” command first, and then scan the “SPP Slave Mode”
command. The link indicators of scanner will blink blue 3 times per 2
seconds during searching process.
Uninstall
SPP Slave Mode
You have to execute the Bluetooth Discovery procedure to find all
available Bluetooth device list in your remote host. You will see
‘’PF(L/A)xxxBT-xxxx’’ is shown in the list if the scanner is successfully
discovered.
Double click the “PF(L/A)xxxBT-xxxx” on the discovered Bluetooth
devices. If the Passkey (PIN) is requested,, please enter “00000000”
(default setting). You will see “Serial Port on PF(L/A)xxxBT-xxxx”. Please
double click this SPP service to establish the connection between
scanner and remote host device.
The scanner will emit 4 beeps in ascending tone to indicate the
connection is established. At the same time, the link indicators of scanner
will blink blue once per 2.5 seconds to indicate the scanner is in
radio-connected state.
Please note that if the scanner is not connected to the host device within
1 minute after scanning the “SPP Slave Mode” command, the scanner
will go to sleep automatically. You can just press the trigger to wake up
the scanner to continue the installation.
The above procedures are based on Windows environment. But the
installation procedure may vary depending on different remote host
devices, operating systems and the Bluetooth drivers. Please consult
your professional IT consultant to obtain necessary support if any
problem has been encountered during the installation processes. For
more detailed information, please visit CINO website.