Jt25 operator’s manual – Ditch Witch JT25 User Manual

Page 179

Advertising
background image

Service - 178

JT25 Operator’s

Manual

50 Hour

CMW

Lube SaverLok Collar

Lube SaverLok collar with EPS every 50 hours.

To lube:

•

Stop engine and turn battery disconnect switch
to the off position.

•

Clean exposed portion of sliding output shaft
with pressure washer to remove grime.

•

Blow dry with compressed air.

•

Apply EPS spray lube to all exposed shaft
surfaces while manually moving the shaft in
and out.

•

Turn battery disconnect switch to the on position.

Check Heavy-Duty Anchor Driver
Gearbox Oil Level (Optional)

Check heavy-duty anchor driver gearboxes oil level
at fill plug (shown) every 50 hours. Add MPL at fill
as needed.

IMPORTANT: Gearbox must be level for
accurate reading.

j37om058h.eps

j37om058h.eps

Advertising