Ditch Witch JT25 - Manual (Page 31)

Controls - 30
JT25 Operator’s Manual
Left Control Console
Item Description Notes
1. Wrench control To clamp and rotate rear
wrench, push forward.
To unclamp rear wrench, pull
back.
To clamp front wrench, move
to right.
To unclamp rear wrench,
move to left.
2. Set/Resume switch To resume operation or
increase operation levels,
press top.
To set operating conditions or
reduce operation levels,
press bottom.
See “Cruise Control” on page 140.
3. Pipe gripper switch To close, press top.
To open, press bottom.
4. Pipe shuttle switch To move toward pipe box,
press top.
To move toward spindle,
press bottom.
c00ic612h.eps