Dream Property DM7020 - Manual (Page 23)

- 23 -
22. Automatic Multisat Scan
Press the MENU-Button to enter the OSD-Mainmenu.
Go to (6) Setup -> (2) Service Searching -> (6) Automatic Multi Scan.
23. Manual Transponder Scan
Press the MENU-Button to enter the OSD-Main menu.
Go to (6) Setup -> (2) Service Searching -> (7) Manual Transponder Scan.
The Manual Transponder Scan is recommened for
scanning a specific Transponder that has not been
found during Automatic Transponder Scan. New
services will be added to the Service list.
Press the OK-Button on the upper Dropdown list and
choose the appropiate Satellite, press the OK-Button
again to select.
Type in the correct Transponder Values in its fields.
Press the green Option-Button to start scan. The
scan results will be shown in the next window.
The Automatic Multisat Scan is recommened for
scanning all configured satellites at once.
By pressing the OK-Button on each satellite a
couple of times, you set the scan method.
First: nothing, satellite will not be scanned Second:
all, services will be scanned Third: only free, services
will be scanned Fourth: nothing, again
Press the green Option-Button to start scan.
This window appears after scanning the satellites.
Press the OK-Button and answer no to the next
question.