Dream Property DM7020 - Manual (Page 6)

- 6 -
4. Description Rear view
4.1. Main power 230V / 50Hz
Plug in the power cable into the main power socket. The power plug remains only in its designated
socket 230V / 50Hz.
4.2. TV Scart
Connect your TV with an appropriate Scartcable to your Dreambox.
4.3. VCR Scart
Connect your VCR with an appropriate Scartcable to your Dreambox. Remember, the VCR Scart is not
designed to record a Video signal from the VCR.
4.4. HiFi-Amplifier
Connect your HiFi-Amplifier either to the analogue audio R/L (RCA/Cinch) or digital audio (Toslink)
socket.
4.5. Analogue Audio (Cinch)
Connect your Dreambox with an appropriate RCA/Cinch cable to your HiFi-Amplifier (e.g. AUX or Tape
socket).
4.6. Digital Audio (Toslink)
Connect your Dreambox with an appropriate optical (Toslink) cable to your HiFi-Amplifier or DSP. The
Dreambox provides sample rates from 16, 22.05, 24, 32, 44.1, 48 kHz. The AC3 signal is also available
at this socket, if the selected channel transmits Dolby Digital signals.
4.7. Communication Port (Ethernet 10/100MBit, RJ45)
The Communication Port is an Ethernet socket. Used to communicate with the Dreambox via HTTP,
FTP, NFS, Telnet und Samba to access your recorded movies or to upload channel lists. This socket is
also mentioned to update the Operation system. Please connect an appropriate patch cable. See
passage DreamUp - Software upgrade.
4.8. Mini DIN
The Mini DIN Port is meant for external I2C rotor signals and provides signals for external IR Devices.
4.9. USB Port
The USB Port is designed for USB 1.2 compatible devices. The amount of provided USB devices
depends on the installed image (Software) and is still under development.
4.10. Serial Port (RS232C, Sub-D, 9-pin)
The Serial Port is meant to update the operation system. Please connect a serial nullmodem cable
here. See passage DreamUp - Software upgrade.
4.11. LNB In
Connect the coaxial cable from your LNB here. Please disconnect the Dreambox first.
4.12. LNB Out
Connect an analogue receiver here. Remember to shutdown your Dreambox into Deep-Standby-
Mode, if you wish to view analogue TV.