Dream Property DM800 HD PVR - Manual (Page 11)

- 11 -
U s e r M a n u a l D r e a m b o x D M 8 0 0 H D P V R
e d i e n u n g s a n l e i t u n g D r e a m b o x D M 7 0 2
1.3.1 Explanation Front Panel
Smartcard reader
Insert your Dreamcrypt Smartcard with the golden chip facing down and forward into one of
the two Smartcard reader slots. Dreamcrypt is a registered trademark of Dream-Multimedia.
OLED-Display
The OLED-Display shows all major information.
Remote control sensor
The remote control sensor receives the infrared signals of the Dream Remote Control.
Power button
The Power-Button switches your Dreambox on and off.
1.3.2 Explanation rear panel
LNB input (DVB-S Tuner)
Connect the coaxial cable from your LNB here.
LNB output (DVB-S Tuner)
You can connect an analog/digital receiver here. Remember to shutdown your Dreambox
into Deep-Standby-Mode in order for the receiver to work.
Antenna in (DVB-C/T Tuner)
Connect the coaxial cable from your antenna here.
Antenna out (DVB-C/T Tuner)
You can optionally connect your TV or VCR here.
eSATA connector
You can connect an external SATA Hard disk.
Note: Please note, that this connector only works, if no hard disk is installed internally.
Modem port
You can optionally connect your Dreambox to your ISP via the Modem Socket using a phone
line.