Dream Property DM800 HD PVR - Manual (Page 71)

- 71 -
U s e r M a n u a l D r e a m b o x D M 8 0 0 H D P V R
10.5 OLED-Display
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option “Setup” and press the OK-Button to select
.
1. Navigate to the option “System” and press the OK-Button.
¾ The “System” menu will open up.
2. Navigate to the option “Display setup…” and press the OK-Button.
Using the Navigation-Buttons left and right you
can set the brightness of the OLED-display.
“Standby” set the brightness value for standby.
If “Invert” is set to “Yes” the polarity of the OLED-
display will change.
All changes will take effect immediately.
Press the green Options-Button to save the setting
or the red Options-Button to discard them.
You are taken back to the “System“ menu.