Dream Property DM800 HD PVR - Manual (Page 20)

- 20 -
U s e r M a n u a l D r e a m b o x D M 8 0 0 H D P V R
3. Start
wizard
The start wizard helps you with the basic setup of your Dreambox.
3.1
Video output selection
You will be shown different video output modes for roughly 10 seconds, after you have
connected and switched on your Dreambox. Once you see a clear picture on your TV screen
press the OK-Button to select it. If you prefer a different output than the selected one you
can use the Navigations-Buttons up/down and the OK-Button to select it.
Pressing the red Options-Button will toggle the language.
You can choose from the following video output
options:
1. Scart
using a Scart cable
2. DVI
using a DVI or DVI-to-HDMI cable
Select your desired option with the Navigation-
Buttons up and down. Press the OK-Button to
activate.
You are taken to the next step.
You can now select the video mode.
The possible options strongly depend on the video
output mode you have selected in the step before. To
learn more about the options refer to chapter 10.4
A/V Settings.
Select your desired option with the Navigation-
Buttons up and down. Press the OK-Button to
activate.
You are taken to the next step.