Dream Property DM800 HD PVR - Manual (Page 72)

- 72 -
U s e r M a n u a l D r e a m b o x D M 8 0 0 H D P V R
10.6 Network
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option “Setup” and press the OK-Button to select
.
1. Navigate to the option “System” and press the OK-Button.
¾ The “System” menu will open up.
2. Navigate to the option “Network…” and press the OK-Button.
3. Navigate to the option “Device setup…” and press the OK-Button.
4. Navigate to the option “Integrated Ethernet” and press the OK-Button.
Note
If you are using a DHCP server in your LAN, configure the DHCP server so it
does not assign the IP address used by the Dreambox. Otherwise an IP
address collision is possible. Refer to the DHCP server’s manual about how to
configure a DHCP address pool.