Echelon SmartServer 2.2 - Manual (Page 223)

224 Using the SmartServer as Network Management Tool
8. The LNS Network dialog opens.
9. In the OpenLNS Network property, either select an existing OpenLNS network database to be
updated with the network configuration stored in the SmartServer’s internal database (XML files
in the /config/network folder on the SmartServer flash disk), or create a new OpenLNS network
database.

To select an existing OpenLNS network database, select the name of the OpenLNS network
database from the list and then click Finish.

To create a new OpenLNS network database, click the arrow to use the current network name
for the OpenLNS network database or enter a different descriptive name (maximum 14
characters) that is unique to the selected OpenLNS Server, click Next, and then click Finish
in the Create LNS DB? dialog. The new OpenLNS network database is created in the
ilon\db folder on your computer.
10. If IP-852 routing is activated on your SmartServer, a dialog appears informing you that you need
to reboot your SmartServer in order to use it as an IP-852 router. Click Close.