Echelon SmartServer 2.2 - Manual (Page 313)

314 Using the SmartServer as Network Management Tool
The SmartServer will use the application image file that has program ID matching that of the device
from the /LonWorks/import folder on the SmartServer flash disk and then download it to the device.
The device to be loaded must be online for the upgrade operation to succeed.
To load a device application, follow these steps:
1. Copy the APB file of the new application and the XIF file of the new device interface (if required)
to the /LonWorks/import folder on the SmartServer flash disk.
2. Click Driver.
3. Select one or more devices from the tree to be upgraded.

To select one device, click that device.

To select multiple devices and perform a batch load, click one device and then either hold
down CTRL and click all other devices to be loaded or hold down SHIFT and select another
device to load the entire range of devices. The Setup - LON Device Driver Web page opens.
4. Select the APB file to be downloaded to the device, following these steps:
a. In the Application Image property, click the button to the right.
b. The Choose File dialog opens.
c. Expand the LonMark Image (APB) entry to show the /lonworks/import folder. Expand the
lonworks/import folder to show the application image files in it.