Echelon SmartServer 2.2 - Manual (Page 368)

SmartServer 2.2 User’s Guide 369

To create a new preset, click the Add radio button at the top, enter the name of the new
preset in the field, and then click the Add button on the right side next to the field in
which you entered the name of the preset. The new preset appears without a value in the
Scheduler: Data Points Web page.

To delete an existing preset, click the Delete radio button at the top, select the preset from
the list of presets, and then click the Delete button on the right side next to the list of
presets. The preset is removed from the Scheduler: Data Points Web page.
c. Click Close.
5. Optionally, you can edit the values of existing presets. To do this, follow these steps:
a. Click the preset to be edited. The Edit Presets dialog opens.
b. Enter the value (or values if you are editing the preset of a structured data point) for the
preset.
c. Click OK.
6. Click Submit.
7. Click Back to return to the Scheduler: Configure Web page.