Echelon SmartServer 2.2 - Manual (Page 442)

SmartServer 2.2 User’s Guide 443
3. The Digital Input: Configure Web page opens.
4. The Digital Input application contains the following three data points:

nviClsValueFB (SNVT_switch). Used to synchronize a group of switches.

nvoClsValue (SNVT_switch). Sends the value and state of the digital input (ON or OFF) to
a device that accepts a SNVT_switch input. The value and state are derived from the raw
values received from the device.

nvoClsSetting (SNVT_setting). Sends the setting, scene setting level, and rotation angle of
the digital input device (SET_ON 0.0 0.00 or SET_OFF 0.0 0.00) to devices such as
occupancy sensors and constant light controllers that accept a SNVT_setting input.
5. Select whether the digital input device uses a Normally Open or Normally Closed sensor. This
determines how the signal received from the digital input device is processed before being sent to
the nvoClsValue and nvoClsSetting output data points.