Echelon SmartServer 2.2 - Manual (Page 306)

SmartServer 2.2 User’s Guide 307
service pin message from the actual device being commissioned is selected by default based on
having a program ID matching the one fetched from the device.
8. Click OK to return to the Setup - LON Device Driver Web page.
9. Click Submit.
10. Select the devices to be commissioned following the Selecting Devices section.
Selecting Devices
After acquiring the Neuron IDs of the devices to be installed, you select those devices on the tree. To
do this, follow these steps:
1. Click Driver.
2. Select one or more devices from the tree to be installed.

To select one device, click that device.

To select multiple devices, click one device and then either hold down CTRL and click all
other devices to be installed or hold down SHIFT and select another device to install the
entire range of devices.
3. The Setup - LON Device Driver Web page opens. Proceed to the next section, Installing Devices
using Smart Network Management, to install the devices.
Installing Devices with Smart Network Management
Once you have selected the devices to be installed, you use smart network management on the Setup -
LON Device Driver Web page to install them. With this option, the SmartServer asynchronously sets
the following device properties to the states it determines to be desired:

program ID.

commission status (commissioned or decommissioned).

application state (online or offline).

application image.

device template (external interface).

default configuration property values.
Enabling Smart Network Management
You can enable smart network management for all the device properties by selecting Smart Network
Management in the Smart Network Management column header. Download the device application
if you are installing devices that must be loaded with an application image files. The application image