Echelon NodeBuilder FX - Manual (Page 141)

NodeBuilder FX User's Guide 127
System Image
Version Select the system image version for the selected Neuron Chip or Smart
Transceiver model. See your Neuron Chip or Smart Transceiver data
book for more information.
Select <Default> to use the default system image for the chosen chip.
The default system image is the most current system image version
included with this version of the NodeBuilder tool and any applied
service packs.
Select <Custom> to specify your own custom system image in the
Image Name property. See the Neuron C Programmer’s Guide for
information on creating custom system images.
Image Name Displays the file name of the system image. If <Custom> is selected in
the System Image Version property, you can enter a system image file
name or click the button to the right and browse to a system image
symbol file (.sym extension).
For 5000 Series chips, the name of the default system image is
BFT5000.
Firmware Version
Displays the firmware version used by the selected system image if
the System Image Version property is set to <Default>; otherwise
N/A is displayed.
Setting Memory Properties
You can view and set the on-chip and off-chip memory properties for a hardware template on the
Memory tab of the NodeBuilder Hardware Template Editor dialog.