Echelon NodeBuilder FX - Manual (Page 53)

NodeBuilder FX User's Guide 39
Note: The current list of manufacturer IDs, device classes, usage values, and channel types
are defined in an XML file (spidData.xml) that is available at
www.lonmark.org/spid . This
file is updated as L ON M ARK International adds new manufacturer IDs, device classes, usage
values, and channel types.
5. Click OK to return to the New Device Template wizard. The Program ID property contains the
program ID you specified in the Standard Program ID Calculator dialog.
Tip: Do not clear the Enable check box under Automatic Program ID Management. This
enables the Model Number (NN) field in the program ID to be incremented automatically when
the external interface of the device is changed. This allows for the easy development of a device
with a changing external interface during development. The program ID will cycle through the
range of specified model numbers to avoid two devices having the same program ID but different
external interfaces.
6. Click Next. The Hardware Template window opens.
7. Specify the development build and release build hardware template.
• If you are using the NodeBuilder FX/FT hardware (FT 5000 EVBs), select FT 5000 EVB in
both the Development Build Hardware Template and Release Build Hardware Template
properties.