Echelon NodeBuilder FX - Manual (Page 143)

NodeBuilder FX User's Guide 129
3150 Neuron Core
For Neuron 3150 Chips, 3150 FT Smart Transceivers, and 3150 PL Smart Transceivers, the on-chip
memory values are dependent on the chip type and may not be modified with the exception of the
Extended On-chip RAM. The Type property in the Non-Volatile Memory box specifies the type of
non-volatile memory (EEPROM, FLASH, and NVRAM) used, if any. For devices where the system
image is kept in non-volatile memory, select either flash or NVRAM. EEPROM is not supported for
this configuration.
3120 and 3170 Neuron Core
For the Neuron 3120 Chips, 3120 FT Smart Transceivers, 3120 PL Smart Transceivers, and 3170 PL
Smart Transceivers, the on-chip memory values are dependent on the chip type and may not be
modified with the exception of the Extended On-chip RAM. These chips do not support off-chip
memory, therefore, the Off-Chip ROM, Off-Chip RAM, Off-Chip Non-Volatile and I/O properties
are set to N/A.
Setting the Hardware Template Description
You can enter an optional description for a hardware template in the Description tab of the
NodeBuilder Hardware Template Properties dialog. This description will be saved in the hardware
template file and will be available if this hardware template is used in other NodeBuilder projects.