Electrocompaniet ECM 2 - Manual (Page 4)

4
ENG
Warning:
To avoid risk of fire or electric shock, do not expose this appliance to rain or moisture. Verify line
voltage before use. Do not remove cover. No user serviceable parts inside. Refer servicing to qualified
service personal. The warranty is void if the product is tampered with by non-authorised personnel.
Use only authorized Electrocompaniet service center.
The contents of the carton
• 1 pc.
• 1 pc.
• 1 pc.
• 1 pc.
• 2 pcs.
• 1 pc.
• 1 pc.
• 1 pc.
Front Panel
The front panel display will show the currently selected user mode of your ECM 2 Network Media Player.
The different user modes are:
MEDIA:
Your ECM 2 is in MEDIA mode. In this mode your ECM will act as a multiformat network media
streamer and player. Use this mode to play music, watch videos or TV series. (Refer to the Home screen,
the Screen navigation and the Playback sections for detailed instructions on how to operate your ECM
in this mode.)
COAX1/COAX2/TOSLINK1/TOSLINK2:
The ECM 2 is in DAC mode and the active/selected input is indicated in the front panel display. In this
mode you can listen to connected digital audio sources to take advantage of the High End digital to
analog converter built into your ECM for optimal audio quality.
Status display mode
The display mode shows the volume setting and sample rate for the selected input. The display enters into
“status” mode when the volume is operated or when there is a change in input selected or the sample
rate. After 5 seconds, the display will revert back to the INPUT mode.
In “status” mode the following information is displayed:
The first part shows the current sample rate at the input and the last number
shows the volume setting. Volume indication ranges between 0 to 100.
C
M
Y
CM
MY
CY
CMY
K
MEDIA
192
kHz
100
ECM 2 Balanced Network Media Player
AC main cord.
Antenna for wireless network.
IR Remote control
Batteries for remote control
Quick start guide
CD with the owner’s manual
Inspection card