Connecting to a network, Wired network connection (recommended), Wireless network connection – Electrocompaniet ECM 2 User Manual

Page 8: Connecting media storage, Usb discs, Wired network connection, Wireless network connecion, Installation

Advertising
background image

8

ENG

Installation

Connecting to a network

Your ECM requires a broadband internet connection for getting

media info, playing internet content and for software updates.

A network connection is also required for streaming content

from network attached storage (NAS) and network media share

locations. Your ECM provides two methods of connecting to a

network: Wired network connection (using an Ethernet cable) or

wireless network connection (using the built in wireless adapter).

Wired network connection (Recommended)

• Connect an Ethernet cable to the LAN port of your ECM to connect to a wired network.

• Your ECM will automatically try to connect to your network when a network cable is detected.

(Please refer to the Wired network setup section for detailed instructions on how to manually

setup a wired network connection)

Wireless network connection

• Connect the supplied wireless antenna to your ECM if you want to connect to a wireless network.

• Configure your wireless network connection in the network setup menu of your ECM

(Please refer to the Wireless network setup section for detailed instructions about how to connect

to a wireless network)

Connecting media storage

Your ECM can play media from both internal and attached storage devices. The ECM can also play media

files from network sources such as network attached storage (NAS) devices and network media shares.

(Refer to the Network/NAS section under Managing sources for more information on how to access

media from network locations)


USB discs

• Your ECM supports playback of video and audio files stored on external USB disk drives or

USB thumb drives/memory sticks. (Please refer to section for supported file formats for a

complete list of supported file formats) You may connect USB discs or thumb drives to any of the

4 USB inputs on your ECM.

NOTE:

USB devices are read-only. The ECM will never write to your disk in order to prevent data corruption.

USB storage may be removed at all times.

i

i

NOTE:

A wired connection is recommended whenever possible for speed and stability. The wireless network option

is not used if wired network access is detected.

C

M

Y

CM

MY

CY

CMY

K

Advertising