Local disc installation, How to install internal hard drive, Installation – Electrocompaniet ECM 2 User Manual
Page 9: Flip the ecm 2, Remove screws and take out the hdd holder, Insert the hdd (3,5’’ or 2,5’’), Tighten the screws, Connect the wires, Cm y cm my cy cmy k
9
ENG
Installation
Local disc installation
Your ECM supports adding an internal hard drive or SSD for storing media files. A drive with a SATA interface
drive is required for this connection. Both 3,5” and 2,5” drives can be mounted.
All common filesystems are supported, including: NTFS, ExFAT, FAT, EXT4, HFS+
NOTE:
The disk will be formatted for use. All data on the drive will be lost. If the hard drive is installed it will be turned
off when not in use. This prevents vibrations from negatively influencing audio playback quality.
ECM have no limitations for internal disk capacity.
How to install internal hard drive
C
M
Y
CM
MY
CY
CMY
K
C
M
Y
CM
MY
CY
CMY
K
C
M
Y
CM
MY
CY
CMY
K
C
M
Y
CM
MY
CY
CMY
K
C
M
Y
CM
MY
CY
CMY
K
C
M
Y
CM
MY
CY
CMY
K
C
M
Y
CM
MY
CY
CMY
K
1.
Flip the ECM 2
2.
Remove screws and take out the HDD holder
3
. Insert the HDD (3,5’’ or 2,5’’)
4.
Tighten the screws
5.
Connect the wires
6.
Tighten the screws
C
M
Y
CM
MY
CY
CMY
K
i