Elenco Radio Controlled Car Soldering User Manual
Page 10
Advertising
-9-
Locators
Rear Axle:
the “grip” near the
middle should be
toward the left
Locator Slots
NOTE: The
next 3 steps will be
much easier if you
elevate the car about
1” using a small
object.
4
Gear for rear axle:
slide on until it is
firmly in the
“grips” on the axle
Rear Wheels
Hard
surface
Note:
You may want to use the
method illustrated above to slide the
gear onto the rear axle. Warm the axle
and gear with a heat gun or hairdryer,
then press the gear on carefully using
both thumbs.
Advertising